Home > Civil Engineering > Airport Engineering

Airport Engineering - Interview Questions and Answers

Prepare for your technical interview with these Airport Engineering questions.

Ready to test your skills?

Take a timed mock test specifically for Airport Engineering.

Start Mock Test
16. According to ICAO, all markings on the runways are
A. Yellow
B. White
C. Black
D. Red
Explanation: ANSWER : : White Explanation :
17. Zero fuel weight of an aircraft is:
A. equal to empty operating weight
B. equal to maximum landing weight
C. less than empty operating weight
D. equal to sum of empty operating weight and the maximum pay load.
Explanation: ANSWER : : equal to sum of empty operating weight and the maximum pay load. Explanation :
18. Consider the following statements regarding iCAO recommendation for correction to basic runway length # The basic runway length should be increased at the rate of 7 percent per 300 m rise in elevation above the mean sea level. # The basic runway length after having been corrected for elevation should be further increased at the rate of 1 percent for every 1�C rise in airport reference temperature above the standard atmospheric temperature at that elevation. # The runway length after having been corrected for elevation and temperature should be further increased at the rate of 20% for every 1 percent of effective gradient. Of these statements
A. 1 and 2 are correct
B. 2 and 3 are correct
C. 1 and 3 are correct
D. 1,2 and 3 are correct
Explanation: ANSWER : : 1 and 2 are correct Explanation :
19. Runway threshold is indicated by a series of parallel lines starting from a distance of
A. 3 m from runway end
B. 6 m from runway end
C. 10 m from runway end
D. 15m from runway end
Explanation: ANSWER : : 6 m from runway end Explanation :
20. The size of landing area for multiengined helicopters operating under 1FR conditions is
A. 22.5 m x 22.5 m
B. 30 m x 30 m
C. 22.5 m x 30 m
D. 60 mx 120 m
Explanation: ANSWER : : 60 mx 120 m Explanation :